SECTION 1—IN GENERAL
Adjustable Stroke Detect-A-Finger
®
Drop-Probe Device
Rockford Systems, LLC
2
Call: 1-800-922-7533
SECTION 1 - IN GENERAL ....................................................................................... 2 - 8
SECTION 2 - INSTALLATION OF COMPONENTS
...................................................
9 - 15
Control Box .............................................................................................................. 9
Mini Filter-Regulator Assembly................................................................................ 10
Drop-Probe Assembly, PVC Insulator Block, and Sensing Probe .......................... 10-11
Wiring and Air Tube Connection .............................................................................. 12
Other Components That May Be Required ......................................................... 13-14
Installation Considerations .......................................................................................15
SECTION 3 - POWER-UP PROCEDURES ..................................................................... 16
SECTION 4 - TROUBLESHOOTING ....................................................................... 17-18
SECTION 5 - REPLACEMENT PARTS .......................................................................... 19
ORDER FORM ............................................................................................................. 20
RETURN AUTHORIZATION FORM ................................................................................ 20
Efficient and safe machine operation depends on the development, implementation and enforcement of a safety program. This program requires,
among other things, the proper selection of point-of-operation guards and safety devices for each particular job or operation, a thorough safety
training program for all machine personnel, that includes instruction on the proper operation of the machine, the point-of-operation guards and
safety devices on the machine, and a regularly scheduled inspection and maintenance program.
Rules and procedures covering each aspect of your safety program should be developed and published both in an operator’s safety manual, as
well as in prominent places throughout the plant and on each machine. Some rules or instructions which must be conveyed to your personnel and
incorporated into your program include:
A company’s safety program must involve everyone in the company, from top management to operators, since only as a group can any operational
problems be identified and resolved. It is everyone’s responsibility to implement and communicate the information and material contained in catalogs
and instruction manuals to all persons involved in machine operation. If a language barrier or insufficient education would prevent a person from
reading and understanding various literature available, it should be translated, read or interpreted to the person, with assurance that it is understood.
Never
place your hands or any part of your body in this machine.
Never
operate this machine without proper eye, face and body protection.
Never
operate this machine unless you are fully trained, instructed, and have read the instruction manual.
Never
operate this machine if it is not working properly – stop operating and advise your supervisor immediately.
Never
use a foot switch to operate this machine unless a point-of-operation guard or device is provided and properly
maintained.
Never
operate this machine unless two-hand trip, two-hand control or presence sensing device is installed at the proper
safety distance. Consult your supervisor should you have any questions regarding the proper safety distance.
Never
tamper with, rewire or bypass any control or component on this machine.
DANGER
DANGER
FOR MAINTENANCE AND INSPECTION ALWAYS REFER TO THE OEM’s (ORIGINAL MACHINE MANUFACTURER’S) MAINTENANCE MANUAL
OR OWNER’S MANUAL. If you do not have an owner’s manual, please contact the original equipment manufacturer.
© 2019 Rockford Systems, LLC. All rights reserved. Not to be reproduced in whole or in part without written permission. Litho in U.S.A.
DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
This safety alert symbol identifies important safety messages in this manual. When
you see this symbol, be alert to the possibility of personal injury, and carefully read
the message that follows.
CAUTION used without the safety alert symbol indicates a potentially hazardous situation
which, if not avoided, may result in property damage.
DANGER
Safety Precautions
CAUTION
