4. Once the desired crossover output is selected, its corre-
sponding CROSSOVER RESPONSE screen is displayed. Be-
low is an example of a BANDPASS 1 CROSSOVER RESPONSE
screen.
dB = 0.0
F3 = 303
20
200
2k
20k
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
5. To adjust the high-side cutoff frequency (F3)
press the
function key
on
the extreme
right.
To adjust the low-side
cutoff frequency,press
the function key on the extreme left.
6 .
To increase the cutoff frequency (F3) press the
blue
Right
arrow key. To decrease, press the
blue
Left arrow key.
Notice how the cutoff graph changes as you adjust the
cutoff frequency, here indicating the lowpass frequency
cutoff at 303 Hz.
Use the blue Up and Down arrow keys to adjust the selected
output’s level over a ±l2dB range. To return this setting to
unity gain (O.O), press the
blue
Zero Set Key.
7 .
When finished press the ESC key twice to return to the Main
Menu.
-9-
