Select Mounting Location
Installation
Select mounting location, taking care to avoid the following:
Places exposed to heat-radiating appliances such as electric heaters
Adjacent to other equipment that radiates heat
Poorly-ventilated or dusty places
Moist or humid locations
Use the mounting hole diagram(below)to measure and cut a mounting hole, and
mount the unit using the four 3X30min self-tapping screws provided.
Before cutting the mounting hole, make sure the area behind the mounting
location is clear of wires and fuel, vacuum and or brake lines.
Route power, speaker and antenna cables through the hole, and connect them to
the unit as outlined in the wiring diagram. After ensuring correct connections, test
operation.
Preparing the Opening
Note:
Mounting the Radio
RECOMMENDED
CUTOUT
MOUNTING SCREWS
#6 X 1.5
PHILLIPS TYPE
ROUND HEAD 4 PLCS.
”
9.75
9.30
4.69
6.16
0.23
0.71
MAX R.19
4 PLCS.
Mounting Hole Diagram
◆
Digital
Digital
The
setup menu controls the following features:
Setup
OP MODE
DYNAMIC RANGE
DUAL MONO
: Adjust the output mode: LINE OUT or RF REMOD.
:
Adjust the DYNAMIC RANGE of the screen from the
following levels: FULL,6/8,4/8,2/8 or OFF.
: Adjust the DUAL MONO of the screen from the following levels:
STEREO,MONO L,MONO R,MIX MONO.
OP MODE
DYNAMIC RANGE
DUAL MONO
Содержание RFX8500 DVD
Страница 1: ......
