6
Symptom
Diagnosis
Remedy
Basic
Remote does not turn on
No battery
Insert battery (1 X CR2032) into unit.
Battery is dead
Remove the old battery from unit and replace it with a new
one.
Battery was installed backwards
Remove the battery and reinstall it with the + side of the bat-
tery facing the same direction as the + symbol on the tray.
Bluetooth
Remote will not pair
Remote is not showing up in bluetooth
list
Press any button to wake the unit up.
Ensure there is a healthy battery installed into the unit.
Toggle bluetooth off then on in the devices bluetooth
settings.
Device being paired to is not in pairing
mode
Turn bluetooth off then back on.
Make sure the device is in searching mode.
Remote is already paired to another
device
Go to settings on your device and forget the remote from the
bluetooths history. Press buttons 6-1-2-3 within 3 seconds
and wait for 3 green flashes from the LED then press pair on
the new device.
Remote is paired but does not
respond
Remote went to sleep
Press any button on the remote to wake it up.
Remote is out of range of device
Move remote/device within the 30 ft range of one another.
(10m).
Connection was lost
Unpair the device from the remote, Toggle the bluetooth off
then back on. Try re-pairing to the remote.
Troubleshooting
Содержание PUNCH PMX-BTUR
Страница 24: ...24 Endnotes ...