
14
S
PECIFICATIONS
Specifications subject to change without notice
MODEL- PUNCH
201S
301S
401S
Maximum Power Rating
All Channels
600 Watts
900 Watts
1200 Watts
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts
4
Ω
Load Per Channel
50 Watts x 2
75 Watts x 2
100 Watts x 2
2
Ω
Load Per Channel
100 Watts x 2
150 Watts x 2
200 Watts x 2
4
Ω
Load Bridged (Mono)
200 Watts x 1
300 Watts x 1
400 Watts x 1
Dimensions: (with Endbell)
Height
2.38" (6.05cm)
2.38" (6.05cm)
2.38" (6.05cm)
Width
9.85" (25.02cm)
9.85" (25.02cm)
9.85" (25.02cm)
Length
10.07" (25.58cm)
11.07" (28.12cm)
11.07" (28.12cm)
Battery Fuse Rating (Amp)
20A
30A
40A
(External to Amplifier)
Fuse Type
ATC
ATC
ATC
MODEL- PUNCH
501S
601S
801S
Maximum Power Rating
All Channels
1500 Watts
1800 Watts
2400 Watts
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts
4
Ω
Load Per Channel
125 Watts x 2
150 Watts x 2
200 Watts x 2
2
Ω
Load Per Channel
250 Watts x 2
300 Watts x 2
400 Watts x 2
4
Ω
Load Bridged (Mono)
500 Watts x 1
600 Watts x 1
800 Watts x 1
Dimensions: (with Endbell)
Height
2.38" (6.05cm)
2.38" (6.05cm)
2.38" (6.05cm)
Width
9.85" (25.02cm)
9.85" (25.02cm)
9.85" (25.02cm)
Length
12.07" (30.66cm)
13.07 (33.20cm)
17.07" (43.36cm)
Battery Fuse Rating (Amp)
50A
50A
60A
(External to Amplifier)
Not Supplied
Fuse Type
AGU
AGU
AGU
Signal-to-Noise Ratio
>100dB A-weighted
Crossover Slope
12dB/octave Butterworth
Crossover Frequency (Model 201S)
Fixed 80Hz LP, AP, 120Hz HP
Crossover Frequency (All Other Models)
variable from 50Hz to 250Hz
Frequency Response
20Hz to 20kHz ±0.5dB
Bandwidth
20Hz to 200kHz ±3dB
Damping Factor @ 4
Ω
(at output connector )
>200
Slew Rate
30 Volts/ms
IM Distortion (IHF)
<0.05%
Acceptable Signal Voltage Range
Variable from 100mV to 6V (RCA Input)
Variable from 0.5V to 11V (High Level Input)
Protection
NOMAD - Internal analog-computer output protection
circuitry limits power in case of overload. Thermal
switch shuts down the amplifier in case of overheating.
Equalization (45Hz Punch Bass) (Model 201S)
Switchable from 0dB to +6dB to +12dB
Equalization (45Hz Punch Bass) (All Other Models)
Variable from 0dB to +18dB @ 45Hz
Input Impedance
20k ohms