_____________________________________________________________________________________________
© Rocket Espresso Ltd. IT05846260965.Espresso machine mod. R 58. User manual Ed. 03.2012. Subject to change without notice # 6
■ Do not touch hot surfaces. Use handle or knobs. Coffee brewing groups, metal
pipes, spouts, steam and hot water valves and wands, metal part of filter holders are
hot and will cause burns. Never hold your hands under the brewing group, the filter
handle, and the steam and hot water wands. Hot drinks, hot steam and hot water are
dispensed. Use always extreme caution when dispensing hot steam and hot water.
■ Do not use outdoors. The machine should not be exposed to elements such as
direct sunlight, rain, snow, frost etc.
■ Never use the machine with wet hands and / or with bare feet.
■ The user must respect the safety regulations at the point of installation and check
the surrounding areas to ensure safe and hygienic use is guaranteed.
■ Do not use aerosol sprays near the machine.
■ Do not place heavy objects or climb on top of the coffee machine.
■ Do not place on or near a hot gas or electric burner or in a heated oven.
■ Do not allow liquids to get inside the machine.
■ This machine is safe only when it has been correctly connected to an efficient
earth / ground system. This should conform to local safety standards and legislation
in force at the time of installation. Protect the user by fitting a circuit breaker to
electric supply feeding the machine.
Dangerous or improper electrical connections are extremely hazardous and should
never occur.
■ To protect against electric shock do not immerse machine, cord and plugs in water
or other liquid and do never let machine’s internal parts get in touch with liquids.
■ Prevent the power cable from being stretched, or pulled tight. Do not let cord hang
over edge of table or counter, or touch hot surfaces. Do not operate the appliance
with a damaged cord, plugs, or after the appliance malfunctions or has been
damaged in any manner. Contact the nearest authorized service facility for
examination, repair or adjustment.
■ Ensure that the machine is installed with a proper earth/ground in accordance to
local safety practises, codes and legislation.
■ Unplug from outlet when not in use and before cleaning or doing any
maintenance. Allow to cool. If the machine is hard plumbed, close the connection to
the water mains.
■ The machine has to operate with clean soft drinking water. If necessary the
manufacturer recommends use of an in line filter. A build up of mineral deposit may
restrict the flow of water within the hydraulic systems causing damage to the
machine and risking personal injury.
■ Never operate the machine without water.
■ Never use warm or hot water to fill the water reservoir. Use cold water only.
■ The machine should not be operated with temperatures lower than 6 °C and hotter
than 36 °C.
