_____________________________________________________________________________________________
© Rocket Espresso Ltd. RE series User Manual Ed. 07.2015. Specifications subject to change without notice.. Page 24
Please follow this procedure (key B and C to set and key A to confirm and switch to
the next setting in the menu) also for the following setting parameters until the
display reads “OFF” again. The next parameters are:
Service phone
You can set a phone number following the same procedure to be used to set the
name.
Groups number: 4
Do not set anything and depress A to go ahead.
Crono function
Disabled ex factory. Do not set anything and depress A to go ahead.
Led-idle
Enabled ex factory. To set on or off the led-lights on product keys.
Keyboard type
Factory set. Do not set anything and depress A to go ahead.
FiCoffee
Disabled ex factory. No boiler water filling during coffee dispensing.
Doses setting
Enabled ex factory. Portions can be set without need of entering the technician’s
menu.
Continuous key
Enabled ex factor). To allow operating the “P” key of machine for semi-automatic
coffee dispensing.
Tea + pump
Do not set anything and depress A to go ahead.
Steam boiler GR
Do not set anything and depress A to go ahead.
PreBrewing
The electronic pre-infusion is disabled ex factory. You can depress A to go to the next
setting or enable the electronic preinfusion operating on keys B and C.
In case you enabled the electronic pre-infusion please see the following:
First read out of display with pre-infusion enabled refers to pre-infusion setting for
key B:
The setting of the pre-infusion (1.0) will blink. Please do the setting using keys B
and C and confirm depressing A.
Pre-Inf. ON sec
Espresso
1.0
