_____________________________________________________________________________________________
© Rocket Espresso Ltd. RE series User Manual Ed. 07.2015. Specifications subject to change without notice.. Page 20
Should the oils in the handle have built up to excessive amounts, it may be necessary
to soak the handle and the metal filter basket in hot water with a cap full of special
detergent product for espresso machines for 30 minutes or so and then rinse
thoroughly in fresh water.
Wash metal filter baskets and filter handle in warm water adding a special detergent
product or espresso machines following the instruction’s of the specific product. It has
to be food quality and for this specific use with coffee machines.
Clean the drip tray (Fig. 1 or Fig. 1B – Pos. 9) and grid with a non abrasive damp
cloth.
Clean drain tray (located under the drip tray) with a clean damp cloth and a clean
brush.
Wipe down surface of machine with non-abrasive clean cloth. Do never use aggressive
cleaners or scouring powders! This operation has to be done when necessary.
How to disassemble/dismantle the machine
The machine has to be disassembled and dismantled by an authorized technician
according to local law and jurisdiction.
1.
Clean filter holders, baskets and brewing head (“group”).
2.
Switch off and let machine completely cool down to ambient temperature.
3.
Remove the drip tray (Fig. 1 or Fig. 1B – Pos. 9)
4.
Open the boiler drain valve (located under the drip tray). The boiler water will
flow into the machine’s drain tray.
5.
When done, close the boiler drain valve.
6.
Position the drip tray (Fig. 1 or Fig. 1 B – Pos. 9).
7.
Store the machine in a safe, dry and clean place.
