RocHobby ROC11242RTRCE, Инструкция по эксплуатации

Страница: 14 / 44

Connecting the battery
VEHICLE SETUP
Step1:open the hood.
Step2:place the battery in the battery box and connect the battery plug.
Throttle stick position
THROTTLE STICK POSITION
Neutral point Top point of forward direction Top point of backward direction
Instructions
14
EN
After setting up, follow the instructions below to operate the system.
1. Automatic code matching (the transmitter and receiver have been successfully coded before
leaving the factory.)
If you need to replace another transmitter or receiver, please follow the following steps to code:
1. When the transmitter power is on and the code matching mode is on, the light keeps flashing;
2. The power supply of the receiving board is turned on, and the front lights keep flashing to enter the
code matching mode;
3. When the code matching is successful, all the transmitter lights are on and all the lights on the car
are off;
Note: when code matching, please operate the transmitter to enter the code matching state first, and
then operate the receiver to enter the code matching state.
1.If it is not in use for a long time, unplug and take off the battery to prevent battery leakage.
2.Do not open, disassemble, or attempt to repair the battery.
3. The battery needs to be disconnected from vehicle before it can be charged
4. Do not charge battery in vehicle.
NOTE