Robustel R2110 Hardware Manual
RT044_HM_R2110
11/11
Login to the Device
1. Connect the router’s Ethernet port to a PC with a
standard Ethernet cable.
2. Before logging in, manually configure the PC with
a static IP address on the same subnet as the
gateway address, click and configure "Use the
following IP address".
3. To enter the gateway's web interface, type
into the URL field of your
Internet browser.
4. Use login information shown in the product label
when prompted for authentication.
w
5. After logging in, the home page of the web
interface is displayed, then you can view system
information and perform configuration on the
device.
6. The automatic APN selection is ON by default, if
need to specify your own APN, please go to the
menu
Interface->Link Manager->Link
Setting->WWAN Settings
to finish the specific
setting.
7. The more configuration details please refer to
RT123_SM_RobustOS Software Manual
.
(END)
Support: [email protected]
Website: www.robustel.com
©2022 Guangzhou Robustel Co., Ltd.
All rights reserved. Subject to change without notice.
