Robusta CYCLONIC 11, Инструкция по эксплуатации

Страница: 19 / 48

19
EN
Before Initial Use
Unpacking
* Keep children and animals away from the packaging material. There is a danger of suffocation!
• Unpack all parts and check the items supplied for completeness (see the «Items Supplied and Device
Overview» chapter) and transport damage. If you fi nd any damage to the components, do not use them (!),
but contact our customer service department.
Assembling the Device
Connecting the Suction Hose to the Device
1. Plug the suction hose into the suction hose connection on the front
of the device. The suction hose must be heard to engage in place.
2. To remove the suction hose, you must press the two catches
on the side of the suction hose and pull out the suction hose.
Connecting the Suction Hose to the Telescopic Tube
1. Slide the end of the suction hose with the exhaust air valve
onto the end of the telescopic tube with the wider diameter.
2. To remove the suction hose from the telescopic tube, simply
pull off the suction hose.
Placing the Nozzle onto the Telescopic Tube
* Always switch off the vacuum cleaner fi rst before changing the nozzles.
The nozzles can be attached either to the telescopic tube or directly to the handle.
• Select a nozzle attachment and plug it onto the end of the telescopic tube with the narrower diameter. To
change the nozzle attachment, pull off the nozzle attachment and plug a new nozzle attachment onto the
telescopic tube. The following nozzle attachments are available to you: