11
Optional 110 Volt E‐Box and Tool/Tailstock Rack
Optional four outlet 110 volt electrical box and
optional tool/tailstock rack are shown.
Tailstock Extension & Wedge
Used to extend the quill and especially useful when the
S16’s gap is removed. The male end goes in the quill,
and the female end accepts your live center or other
#2 Morse Taper accessory.
A wedge is also provided to assist removing the live
center or other accessory from the extension.
Reversing the Banjo
To reach across the gap it is sometimes
beneficial to reverse the banjo.
The banjo can be reversed by unscrewing the
black handle near the tool rest and threading it
into the other end.
As mentioned previously the toolrest clamp can
also be reversed.
In some cases, you may want to use the
optional Tool Rest Dog Leg to get out over the
exposed stem of the banjo when it is used in
the reversed configuration. You will need to
use Low Profile style rests to keep below the
center line of the work.
Reversed Banjo
Using the Optional Dog Leg
