Warnings
6
III
Routine maintenance
Proper maintenance assures the efficiency and good op-
eration of the appliance over time.
Maintenance must be performed according to the man-
ufacturer's instructions (see Chapter 7
p. 37) and in
compliance with current regulations.
Appliance maintenance and repairs may only be entrust-
ed to firms legally authorised to work on gas appliances
and systems.
Enter into a maintenance contract with an authorised
specialised firm for routine maintenance and for servic-
ing in case of need.
Use only original parts.
Decommissioning and disposal
If the appliance is to be disposed of, contact the manu-
facturer for its disposal.
Keep the Manual
This Installation, use and maintenance manual must al-
ways accompany the appliance and must be handed to
the new owner or installer in the event of sale or removal.
III.2
CONFORMITY
EU directives and standards
I gruppi integrati Gitié sono sono certificati in conformità alla
norma EN 12309 e rispondono ai requisiti essenziali delle seg-
uenti Direttive:
▶
2016/426/EU "Gas Appliances Regulation" as amended and
added.
▶
2014/30/EC "Electromagnetic Compatibility Directive" as
amended and added.
▶
2014/35/EC "Low Voltage Directive" as amended and added.
▶
2006/42/EC "Machine Directive" as amended and added.
▶
2014/68/EU "Pressure Equipment Directive" as amended
and added.
▶
811/2013/EU "Energy-Related Products regulation" as
amended and added.
▶
813/2013/EU "Ecodesign requirements regulation" as
amended and added.
Furthermore, they comply with the requirements of the follow-
ing standards:
▶
EN 677 Specific requirements for condensing boilers with
nominal heat input up to 70 kW.
▶
EN 378 Refrigerating systems and heat pumps.
▶
EN 483 Type C boilers of nominal heat input not exceeding
70 kW.
▶
EN 15502 Gas-fired central heating boilers.
Other applicable provisions and standards
The design, installation, operation and maintenance of the sys-
tems shall be carried out in compliance with current applicable
regulations, depending on the Country and location, and in ac-
cordance with the manufacturer's instructions. In particular, reg-
ulations regarding the following shall be complied with:
▶
Gas systems and equipment.
▶
Electrical systems and equipment.
▶
Heating and air conditioning systems, and heat pumps.
▶
Environmental protection and combustion products ex-
haust.
▶
Fire safety and prevention.
▶
Any other applicable law, standard and regulation.
III.3
EXCLUSIONS OF LIABILITY AND
WARRANTY
Any contractual or extra-contractual liability of the man-
ufacturer for any damage caused by incorrect installa-
tion and/or improper use and/or failure to comply with
regulations and with the manufacturer's directions/in-
structions shall be disclaimed.
In particular, the warranty on the appliance may be ren-
dered void by the following conditions:
Incorrect installation.
Misuse.
Failure to comply with the manufacturer's indications on
installation, use and maintenance.
Alteration or modification of the product or any part
thereof.
Extreme operational conditions or however outside of
the operational ranges set forth by the manufacturer.
Damages caused by external agents such as salts, chlo-
rine, sulphur or other chemical substances contained in
the installation water or present in the air of the instal-
lation site.
Abnormal actions transmitted to the appliance by the
plant or installation (mechanical stresses, pressure, vi-
brations, thermal expansion, electrical surges...).
Accidental damages or due to force majeure.
