Robur AY Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 35 / 82

Installation, user and maintenance manual – AY Condensing line, AY series
35
Figure 4�5 – AY Condensing line, AY series
Fumes outlet fitting dimensions.
LEGEND
* seen from above
FUMES EXHAUST EQUIPMENT FOR EXTERNAL INSTALLATION (installation
technician only)
Install the equipment externally as follows (see Figure 4.6 Fumes evacuation pipe
kit
→
36).
You will need: the appliance in its permanent location. Necessary equipment and
materials.
Fit the DN80 roof terminal (detail A) inside the cone on the end of the DN80 1.
extension pipe (detail B).
Fit the DN80 rain guard (detail C) to the DN80 extension pipe (B), with the rain 2.
guard lip turned towards the exterior of the kit (A+B+C).
Remove the protective sticker on the top panel. 3.
The sticker prevents water and foreign bodies entering the appliance before the fumes
kit is installed. The sticker should thus be removed only when the kit itself has been
fully assembled and installed.
Fit the DN80 extension pipe (assembly A+B+C) into the cone of the DN80 flan- 1.
ged union which can be accessed via the appliance’s top panel (detail D). Take
care to position the rain guard properly so that it prevents foreign bodies ente-
ring the hole in the top panel.