Robot System Products P1301, Руководство по эксплуатации продукта

Страница: 52 / 72

52 M0623-1 ver 2.6
4.3.2 Cleaning and lubrication of tool attachment
Action Note
1 Clean grooves Clean the grooves for the locking
balls with a cloth.
NOTE! It is important that this is
done or else there is a risk that
the tool attachment jams.
2 Clean contact surfaces Wipe the contact surfaces of the
air sealings/couplings with a
cloth. Apply a small amount of
grease (Magnalube-G) on the
contact surfaces.
3 Clean surface of signal contact Wipe the contact surface of
electric contacts with a cloth.
NOTE! Signal and electric
interfaces are options
4 Clean holes for the guide pins Wipe clean and apply small
amount of grease (Molykote
BR2Plus) inside the guide pin
holes.
5 Clean tool attachment in generally