Robot Coupe MP 350 Combi Ultra, Руководство пользователя

Страница: 17 / 21

16
27/11/2020
In this case, you can still restart your mixer.
However, your machine will stop again if the
consistency of the preparation is not modified.
If a malfunction occurs which is not on our list of
possible faults, consult your retailer or return the
appliance to the after-sales service.
STANDARDS
Consult the declaration of compliance on page 2.
• If you cannot locate the cause of the problem
- Release the control button (CB).
- Unplug the power mixer.
- Check :
- the plug
- that the blades are free to rotate in the bell,
- the state of the power cord,
- that the drive shaft is free to rotate. To do this,
remove the bell and test the rotation of the end of
the drive shaft manually.
• If the green voltage indicator light is off, check:
- The network voltage
- Correct connection of the
cable to the wall plug.
- Correct attachment of the
cord to the handle (see
page 7).
- The state of repair of the
cord (any cut wires) if
this is the case, see replacement procedure on
page 13.
• If the intensity warning light flashes
(MP 600 Ultra and MP 800 Turbo)
In case of overload or use
of the mixer in a too sticky
preparation, the intensity
warning flashes for 5 seconds
to inform you that the motor
will stop shortly. This stop
indicates that the preparation
in process is too thick or can
not be made with a stick
blender.
L
ight
light
MP 600/MP 800
V
oltage
indicator
light
R E M I N D E R
Never try to override the locking and safety
mechanisms.
Never insert an object into the preparation.
Never switch the appliance on unless it has
been placed in the preparation bowl.
Before dismantling the foot, bell or whisk,
always check that the power mixer is
unplugged.
We recommend that you tilt the power mixer at
a slight angle to prevent the bell from touching
the bottom of the container.
PROBLEMS
At first, try to identify precisely what has caused the
power mixer to stop.
• If it is due to a powercut if the appliance has
been unplugged (the green voltage indicator
light is off).
- Release the control button (CB).
- Check the power supply.
- Restart the power mixer following the paragraph
entitled OPERATING THE APPLIANCE (page 6).
• If it is due to overheating of the machine (the
green voltage indicator light stays on)
- Release the control button (CB).
- Unplug the power mixer.
- Wait a few minutes for the motor to cool down
and the thermal safety mechanism to be reset.
- Restart the power mixer following the paragraph
entitled OPERATING THE APPLIANCE (page 6).