Robot Coupe MP 350 Combi Ultra, Руководство пользователя

Страница: 10 / 21

9
27/11/2020
b
lade locking
b
lades wiTh waTerTighT seals
b
ell
Male driving couPling
k
nife disasseMbling Tool
Removing the tube from the motor unit (MP 350
Combi Ultra, MP 450 Combi Ultra, MP 800 Turbo)
- Check that the appliance is not plugged in.
- Turn the tube in the opposite direction to that used
when attaching it.
- When it will go no further, remove the tube of the
aluminium casing.
Removing the blade
- To remove the blade safely, hold them with the tool
provided or an oven glove or a thick cloth.
- Using the removal tool, the male driving coupling.
- As soon as the male drive coupling has been
unscrewed, the blade can be removed for
cleaning.
• WHISK FUNCTION
(MP 350 Combi Ultra, MP 450 Combi Ultra,
MP 450 FW Ultra)
Attaching the whisk holder to the motor unit.
- Check that the appliance is not plugged in.
- Align the flat side
A of the conical part C of the
whisk holder with the catch B on the inside of the
aluminium casing.
- Insert the whole of the conical part C of the whisk
holder into the aluminium casing.
- Turn the whisk holder in the direction of the arrow
(see figure) until it is locked into place moderately
tightly.
- Check that the machine is not plugged in.
- Align the flat side of
A the conical part of the tube
with catch
B
on the inside of the bell.
- Insert the conical part C into the bell. With the
washer touching the tube seal D , turn the bell
in the direction of the arrow (see above figure)
to lock the bell lug
E and tube lug F together
moderately tightly.
Removing the bell from the foot (valid for all models)
- Check that the machine is not plugged in.
- Turn the bell in the direction of arrow
1 (see next
figure) to separate the bell lug E from the tube lug
F
. Remove the bell.
Attaching the tube to the motor unit (MP 350 Combi
Ultra, MP 450 Combi Ultra, MP 800 Turbo)
- Check that the appliance is not plugged in.
- Align the flat side of
A the conical part of the tube
with catch B into the aluminium casing.
- Insert the whole of the conical part C of the tube
into the aluminium casing.
- Turn the tube in the direction of the arrow (see figure)
until it is locked into place moderately tightly.
T
urn To reMove bell