Robot Coupe CL 52 Series "D", Руководство пользователя

Страница: 5 / 15

14
INTRODUCTION TO
YOUR NEW VEGETABLE
PREPARATION MACHINE
CL 52
The CL 52 is perfectly geared to professional needs.
It can perform any number of tasks, which you will
gradually discover as you use it.
The CL 52 is equipped with a removable lid, metal
bowl an stainless steel motor base. The full moon
hopper is ideal for cutting large products.
The CL 52 is supplied with a wide range of discs
and grids to satisfy even the most demanding chefs
when it comes to cutting up fruit and vegetables, i.e.
slicing, grating, julienne, dicing and french fried
potatoes discs.
Thanks to its simple design, all components requi-
ring frequent handling for maintenance or cleaning
can be fitted and removed in a trice.
To make things easier for you, this manual gives a
breakdown of all the various fitting operations.
This manual contains important information
designed to help the user get the most out of this
vegetable preparation machine.
We therefore recommend that you read it carefully
before using your machine.
We have also included a few examples to help you
get the feel of your new machine and appreciate its
numerous advantages.
ASSEMBLY
1) With the motor base
facing you, place the
discharge plate on the
bottom of the bowl.
Emptying arm for fine grating and
slicing only (cabbage, celer y,
carrots, cheese, etc.).
SIDE A facing upwards (ejection rib
downwards) for any vegetables or
citrus fruit which require careful
handling (tomatoes, mushrooms...).
SIDE B facing upwards (ejection rib
upwards) for all other types of fruit or
vegetables.
SWITCHING ON
THE MACHINE
Before plugging in, check that your power supply
corresponds to that indicated on the machine’s
identification plate.
Switch on the empty machine, making sure that
the blade is rotating properly in an anti-clockwise
direction.
On the motor base, a red arrow marks the blade
rotation direction. If the blade turns in a clockwise
direction, swap over two wires:
Since GREEN/YELLOW is the earth,
DO NOT DISCONNECT.
Swap either: the and the
the and the
the and the
3 2
3 1
2 1
• CL 52 SINGLE-PHASE
ROBOT-COUPE CL 52 are fitted with various types
of motors:
230 V / 50 Hz / 1
115 V / 60 Hz / 1
220 V / 60 Hz / 1
The machine comes with a single-phase plug
con-nected to a power cord.
• CL 52 THREE-PHASE
ROBOT-COUPE CL 52 are fitted with various types
of motors:
400 V / 50 Hz / 3
220 V / 60 Hz / 3
380 V / 60 Hz / 3
The machine is supplied with a cable to which you
simply attach the appropriate electrical plug for
your system. The cable has four wires, one earth
wire, plus three phase wires.
If you have a 4-pin plug:
1) Connect the green and yellow earth wire to the
earth pin.
2) Connect the three other wires to the remaining
pins.
If you have more than 4 pins
in the plug please
note the ROBOT-COUPE does not require a neutral
wire.
W A R N I N G
THIS MACHINE MUST BE EARTHED
(RISK OF ELECTROCUTION)