RS-Ruby Plus User Manual
46
3. In the pop-up “Sensor Configuration” dialog, add and select the correct RS-Ruby Plus
configuration file and click the
OK
button.
4. Click the
Play
button to play or pause the data. Use the Scrub sliding tool to slide back and
forth to select frames at different positions in the data. This tool and the
Record
button are in the
same toolbar (Figure C-9)
Figure C-9 RSView Play Button and Scrub Tool
5.
为
In order to get a more detailed analysis, select a frame of data that you are interested in
and click the
Spreadsheet
button (Figure C-10). A sidebar data table will be displayed on the right
side of the screen, which contains details of all the data of this frame.
Figure C-10 RSView Spreadsheet Tool
6. You can adjust the width of each column of the table, or sort to get a better view.
Figure C-11 RSView Spreadsheet Display
7. Click
Show only selected elements
in Spreadsheet to get the data corresponding to the
selected points (Figure C-12).
Figure C-12 RSView Show only selected elements Tool
8. Click the
Select All Points
tool, which turns your mouse into a data point selection tool (Figure
C-13).