ROBONIK prietest TOUCH, Руководство пользователя

Страница: 37 / 52

prietest TOUCH
USER MANUAL
Version No.: 2.622A
Effective Date: July, 2010
Page 37 of 52
9.6. RATIO
PROGRAMMING / ADDING a NEW TEST (Refer chapter 8)
RATIO
Mode screen before programming would look like the above screen
Refer chapter11 for entering the test parameters .On completion, touch “SAVE” to save the programmed test
Recalling /Running (Operating) a pre-programmed test. (Refer chapter 8)
For example:
.
Name : Test Name, Mod: RATIO 36.54
Pri. : 340 , Sec. : 0 ESC
Temp : 37C , KF : 1.000 EDIT
Vol: 500ul , Unit: mg/dl RUN
Lag : 5 , Read: 10 QCR
Blank: Y, QC : N, Normal: Y PRINT
STD: N, Factor: 1746
Limit Set:
To change values press EDIT
Name : , Mod: RATIO 36.54
Pri. : 340 , Sec. : 0 ESC
Temp : 37C , KF : 1.000
Vol: 300ul , Unit: No –Unt ADD
Lag : 0 , Read: 0
Blank: N, QC : N, Normal: N SAVE
STD: N, Factor : 0.000
Limit Set: PRINT
RATIO Mode screen (After recalling a saved test.)
To change values, touch” EDIT ”
To run the programmed test, touch “ RUN ”
To print, touch “PRINT” (Printing is optional)
To escape, touch “ ESC ”
Test Name:
ESC
PID
RUN
Aspirate Reference
Press ASP Switch to sip
At this stage, the analyser will wait till the temperature of
cuvette reaches the set temperature. The instrument
prompts for REFERENCE, and prompts the user to place
the reference solution (distilled water) below the tube and
to press the aspiration switch. The instrument aspirates
the solution and automatically adjusts the reference.
(Note :To abort temperature setting, touch “ ESC ” once)
Test Name:
ESC
PID
RUN
Wash
Run QC
Read Sample A.
The user has to place the “Sample A” solution below the
tube and press the aspiration switch. The instrument
aspirates the sample and displays the “Sample A”
absorbance.
(Note :At this stage the operator can enter the Patient
Identification .To enter Patient ID ,touch”
PID ” . Entering
PID is optional. )
Test Name:
ESC
PID
RUN
Wash
Run QC
Aspirate Sample B
Press ASP Switch to sip
The user has to place the “Sample B” solution below the
tube and press the aspiration switch. The instrument
aspirates the sample, displays the “Sample B”
absorbance and computes the result.