Robomow RK1000, Руководство пользователя

Страница: 9 / 86

8 9
H. Slope Operation
1. All slopes require extra caution. If you feel that the mower cannot maintain traction on a slope, the
slope is too steep to mow. Wet grass will decrease traction and may cause the mower to slip and
slide on the slope. Serious injury or property damage could result.
2. For your safety, measure any slope before using the mower on the sloped area. Use a slope
measuring device before setting up the mowing zones or operating this mower on a sloped or hilly
area. Smart phone applications can also be used to measure slopes. The mower may slide out of
the mowing zone if the slope is greater than 24 degrees (45%).
3. Do not mow on slopes greater than 24 degrees (45%).
4. Do not operate the mower under any conditions where traction or stability are in question. Always
be sure of the mowing surface. A tip or overturn could cause serious personal injury or property
damage.
5. Stay at least 4’ (1.2 metres) from drop-offs, ditches, slopes or the edge of water to help ensure
that the mower does not slide out of the mowing zone. You could damage the mower or cause
serious injury.
I. Maintenance and Special
Instructions
1. Keep the mower in good working order. Replace worn, damaged or broken parts. Manufacturer part
numbers of the batteries, blades and power supplies are specified in the “Additional Information”
booklet.
2. To avoid serious injury, do not modify the mower in any way.
3. Mower blades are sharp. Wrap the blade or wear gloves and exercise extra caution when changing
the blade.
4. Always turn the mower by removing the disabling device before servicing or clearing blockage of
the mowing blade(s) and/or drive wheels or inspecting the mower. Never attempt to service or
adjust the mower while it is in operation. Before cleaning, repairing or inspecting, make certain the
blade and all moving parts have stopped.
5. The blade should come to a complete stop within two (2) seconds of pressing the red STOP
control. If you do not hear the blade stop within two (2) seconds, your mower must be serviced
professionally by an authorised service dealer before being used again.
6. Never use a high-pressure power washer or hose to clean the mower. Water can damage
components and the programmable controller. Use a damp cloth to wipe the display clean.
7. Visually inspect blade for damage (e.g. excessive wear, bent, cracked). Replace the blade with the
original equipment manufacturer’s (O.E.M.) blade only. Non-O.E.M. blades will not fit properly and
could potentially be unsafe.
8. Use of spare parts which do not meet the original equipment specifications may lead to improper
performance and compromise safety.
9. After striking a foreign object, or getting stuck, stop the mower. Thoroughly inspect the mower for
damage. Repair the damage before starting and operating.
10. For areas close to a children’s play area, bodies of water, drop-offs or public roads, supplement
the perimeter wire with a rigid (wood/stone) boundary edge at least 6” (15 cm) high, which will
help to prevent the mower from exiting the mowing zone.
11. If your mower is installed and operated in an open garden or a public location, you must place
warning signs around those mowing areas, showing the following: “Automatic Lawnmower! Keep
away from the machine! Supervise children!”
12. Clean or replace safety and instruction labels, as necessary.