Robomow RK1000 Скачать руководство пользователя | Manualshive

Страница: 10 / 86

background image

8

9

J. Winter Storage

The Mower

Fully charge the mower in its base station. Turn the mower off. Clean the mower and store it in dry

indoor conditions at an ambient temperatures above 0°C.

Base Station

There are no special winter storage instructions for the base station. It can be left on the lawn during

the winter.
It is recommended that the power supply be disconnected from the mains during the winter.

Annual Service

To keep your mower in good condition, it is recommended that you take it to a certified dealer for

service before or after winter storage.
The annual service may vary between different service providers and will include all or some

of the following: cleaning the mower’s parts and mowing deck, checking for worn parts (such

as blades, wheels and other moving parts) and replacing them if required, testing the mower’s

functions and safety components, checking the battery and uploading the latest software version,

possibly including newly added features.

K. Product End of Use

1. The mower and its accessories should be properly disposed of at the end of their useful life to

prevent waste electrical and electronic equipment from ending up in landfill sites, and to protect

and improve the quality of the environment. Check with your local waste facility or municipality

regarding disposal laws. Many municipalities provide special waste collection sites for the disposal

of batteries and electronic equipment.

2.  Do not dispose of the battery pack or the mower in unsorted municipal/household waste.
3.  Do not dispose of the battery pack in a fire.
4.  Refer to local and statutory regulations for any special disposal or recycling laws and requirements.

Refer to the end of the Quick Reference section for disposal instructions.

5. The mower must be disconnected from the base station when removing the battery;
6. The battery must be removed from the device before it is disposed of. Follow the battery removal

instructions as described in Annex A;

7. The battery must be disposed of safely.

«
...
8
9
10
11
12
...
»

Содержание RK1000























































































Отзывы:

Нет отзывов

Похожие инструкции для RK1000

Бренд: Raven Страницы: 27

Бренд: Raven Страницы: 79

Бренд: Raven Страницы: 88

Бренд: UNI-T Страницы: 4

UPO3000E Series

Бренд: UNI-T Страницы: 94

Бренд: Underhill Страницы: 12

Бренд: UMS Страницы: 92

Бренд: Fast Страницы: 60

Бренд: Additel Страницы: 107

Бренд: IKEA Страницы: 24

Бренд: Walimex Pro Страницы: 44

Бренд: Abus Страницы: 8

Ti-Max NLX nano

Бренд: NSK Страницы: 38

Бренд: Sensio Страницы: 3

Бренд: Numark Страницы: 11

MT765 Challenger

Бренд: Fast Страницы: 31

Бренд: Milestone Страницы: 64

Robus RVB007RGB10I65

Бренд: LED Group Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды