Robomow RK1000 Скачать руководство пользователя страница 85

Страница: 85 / 86

Mower does not dock properly and sometimes misses Base

Station’s contacts

The entrance to the Base Station is not flat. Fill some ground to

flatten the lawn around the Base Station to allow smooth entrance.

Make sure the Perimeter Wire is straight before and after the

Base Station.

Poor quality of mowing

The blades may be dull. Turn off the mower, remove the

disabling device and replace them if needed. Use heavy gloves

when inspecting blades.

Patchy and uneven mowing

Make sure the working window is big enough and Increase the

mowing time via the

Mowing hours

setting to compensate for

lawn’s complexity or fast growing season

Mower does not depart from base for a long time

Tap the mower icon with the information bubble while the

mower is in the Base Station. The non-depart reason code

will be displayed. Refer to our online Help Center for a detailed

description of non-depart codes.

Frequently asked

questions

Содержание RK1000























































































Результаты поиска

Содержание RK1000

Отзывы:

Бренды по названию

Популярные бренды

Robomow RK1000, Руководство пользователя

Результаты поиска

Содержание RK1000

Отзывы:

Бренды по названию

Популярные бренды