Robomow MC150 Скачать руководство пользователя страница 30

Страница: 30 / 50

Robomow Operation

6.1

Automatic Operation

During the One-Time Setup, you have defined the size of your lawn. Robomow will automatically derive the

required Mowing Time for your lawn.

The One-Time Setup configures Robomow to perform automatically the following cycle of operations:

When the battery is fully charged Robomow departs from the Base Station.

Robomow mows the lawn.

It searches for the Base Station when the battery level gets low (Robomow doesn’t mow when it is

searching for the Base Station).

It recharges the battery and gets ready for the next scheduled operation.

It continues mowing until it completes the required time for the lawn area (this is known as a Mowing

Cycle).

Note:

Robomow mows the Edge only in the first mowing of each cycle. In the rest of the operations, Robomow

mows the lawn without the Edge.

Robomow stays at the Base Station during the default

Inactive Time

(All day Sunday and nighttime daily

23:00 to 06:00). Inactive Time may be changed – see Section 6.4.1.3.

Mowing Time

is derived from the set lawn Area.

Mowing Time may be changed using the

Intensity

menu – see Section 6.4.1.2.

Robomow mows the entire area

Twice a week

This frequency can be changed using the

Interval

menu – see Section 6.4.2 (p001 in the table).

Note!

Robomow has the power to mow high grass. However when mowing high grass during the first use or the first

mowing of the season, initially you will see uneven patches of grass.
Please be patient as it may take a few days to one week to overcome and bring the lawn to an even height and

consistency.

6.2

Operating Panel

Operating Panel and buttons:

User / Error messages

Battery and

Charging

indicator

Mower is in the

Base Station

indicator

Red lit constantly – Low Battery

Green blinking – Charging

Green lit constantly – Fully Charged

Area setting indicator

Day and Time

setting indicator

Intensity setting

indicator

Rain Sensor

Inactive Time

setting indicator

Mo Tu We Th

Sa Su

Days of the week

Содержание MC150



















































Результаты поиска

Содержание MC150

Отзывы:

Бренды по названию

Популярные бренды

Robomow MC150, Руководство по эксплуатации

Результаты поиска

Содержание MC150

Отзывы:

Бренды по названию

Популярные бренды