ROBO Cylinder RCP2W, Руководство по эксплуатации

Страница: 3 / 24

z
Never cut and/or reconnect the cables supplied with the product for the purpose of extending or
shortening the cable length. Doing so may result in fire.
[Operation]
z
Do not enter the machine’s range of operation while the product is operating or standing by. The
actuator may move suddenly, causing injury.
z
If you are using a pace maker or other mechanical implant, do not come within one meter of the product.
The strong magnetic field generated by the product may cause the pace maker, etc., to malfunction.
[Maintenance, Inspection, Repair]
z
Never modify the product. Unauthorized modification may cause the product to malfunction, resulting in
injury, electric shock, fire, etc.
z
Do not disassemble and reassemble the components relating to the basic structure of the product or its
performance and function. Doing so may result in injury, electric shock, fire, etc.
Warning
[General]
z
Do not use the product outside the specifications. Using the product outside the specifications may
cause it to fail, stop functioning or sustain damage. It may also significantly reduce the service life of the
product. In particular, observe the maximum loading capacity and speed.
[Installation]
z
If the machine will stop in the case of system problem such as emergency stop or power failure, design
a safety circuit or other device that will prevent equipment damage or injury.
z
Be sure to provide Class D grounding for the controller and actuator (formerly Class 3 grounding:
Grounding resistance at 100
Ω
or less). Leakage current may cause electric shock or malfunction.
z
Before supplying power to and operating the product, always check the operation area of the equipment
to ensure safety. Supplying power to the product carelessly may cause electric shock or injury due to
contact with the moving parts.
z
Wire the product correctly by referring to the operation manual. Securely connect the cables and
connectors so that they will not be disconnected or come loose. Failure to do so may cause the product
to malfunction or cause fire.
[Operation]
z
Before operating the moving parts of the product by hand (for the purpose of manual positioning, etc.),
confirm that the servo is turned off (using the teaching pendant). Failure to observe this instruction may
result in injury.
z
The cables offer excellent flexibility, but they are not robot cables. Do not store the cables in a movable
cable duct (cable bearer, etc.) whose bending radius is smaller than the specified dimension.
z
Do not scratch the cables. Scratching, forcibly bending, pulling, winding, crushing with heavy object or
pinching a cable may cause it to leak current or lose continuity, resulting in fire, electric shock,
malfunction, etc.
z
Turn off the power to the product in the event of power failure. Failure to do so may cause the product
to suddenly start moving when the power is restored, thus resulting in injury or product damage.
z
If the product is generating heat, smoke or a strange smell, turn off the power immediately. Continuing
to use the product may result in product damage or fire.
z
If noise or abnormally high vibration is detected, stop the operation immediately. Continuing to use the
product may result in product damage, malfunction due to damage, runaway machine, etc.