ROBO Cylinder RCP2W, Руководство по эксплуатации

Страница: 17 / 24

9
8. Connecting to the Controller
The actuator is shipped with a 2-meter cable pre-assembled to the actuator body. Connect the connector
on the free end of this cable to the controller via a relay cable.
•
This cable offers excellent flexibility, but it is not a robot cable.
Do not store the cable in a movable cable duct whose bending radius is smaller than the specified
dimension.
•
In applications where the cable cannot be affixed, minimize the load on the cable by not allowing it to
bend more than the deflection due to the self-weight of the cable, by using a self-standing cable hose,
etc., or by wiring the cable over a large radius.
•
Do not cut the cable or reconnect a cut cable to shorten or extend its length.
Should you require the cable to be modified, consult IAI.