17
GB
RECIRCULATION VERSION AIR OUTLET
ELECTRICAL CONNECTION
• Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 mm.
Flue assembly
• Push fit connection
15
onto the air outlet.
• Insert the connection extension pieces laterally
14.1
in connection
15.
• Make sure that the outlet of the extension pieces
14.1
is horizontally and vertically aligned with the
chimney outlets.
• If this is not the case, adjust the position by either
reversing the connection extension pieces
14.1
or by
pushing connector
15
all the way in.
• Ensure that the activated charcoal filters have been
inserted.
Upper exhaust flue
• Slightly widen the two sides of the upper
flue and hook them behind the brackets
7.2.1
, making sure that they are well seated.
• Secure the sides to the brackets using the 4
screws
12e
(2,9 x 9,5) supplied.
Lower exhaust flue
• Slightly widen the two sides of the flue and
hook them between the upper flue and the
wall, making sure that they are well seated.
• Fix the lower part laterally to the hood body
using the 2 screws
12e
(2,9 x 9,5) supplied.
14.1
15
7.2.1
2.1
2.2
2
12e
12e
