Robland LBM, Руководство пользователя

Страница: 34 / 72

34
V0815 LBM
Nederlands Français English Deutsch
Safety and maintenance instructions
Woodworking with machinery is a pleasant job that will give you a lot of satisfaction. Nevertheless,
working with a machine requires constant attention and care. Therefore, for your own safety, pay
attention to the instructions summarised in this chapter.
The machine can only be used safely if the operator strictly follows the operating and safety
instructions.
It is absolutely essential to read this manual before using the machine so you know how the machine
works and what its limitations are.
Always make sure that all safety devices are fited to the machine and that the machine is connected
to a dust extraction system.
Also provide sufficient space around the machine and good lighting in the workshop.
When changing the tools or when doing a maintenance job, the machine must always be
disconnected from its power supply.
Tools which are not correctly sharpened or are in bad condition not only diminish the quality of the
work, but also increase the risk of accidents.
Always wear suitable clothing. Loose or torn clothes are very dangerous.
Keep children away from the machine and the workshop.
To avoid damaging your hearing, the wearing of ear protection is mandatory.
Always make sure the work-piece is secured against slipping.
Make sure all periodic maintenance work is done on time. These maintenance works may only
be carried out with the machine disconnected from the main power supply line thus rendering it
impossible to start the machine involuntarily.
Read carefully the instructions for cleaning the machine, clean only with the machine disconnected
from it’s power supply line.
Test on a weekly basis the following electrical components: emergency stops buttons.
Please read the noise emission values in the manual.
Keep this manual where the operator may refer to them whenever necessary. This manual must
accompany the machine when it is sold, rented or lent to a third party.
Danger list
Attention!
Working with woodworking machines can be extremely dangerous if the safety instructions are not
followed.
Therefore you have to systematically use the safety equipment installed on your machine