Robinsons Extensions 6ft, Руководство по сборке

Страница: 5 / 16

5
Part
No.
Section Size
(mm)
6’
EX
6’ LEAN-TO RIGHT HAND EX.
D919R 1860 1
D916R 1860 1
D917 1860 1
D114 N/A 4
D126 445 3
D962 1890 1
LEAN-TO ROBINSONS EXTENSIONS VERY IMPORTANT INFORMATION:
If you have been supplied with an extension (i.e. your building is longer than 12’), your main building will differ in that the roof end and corner glazing
bars (on the end to which the extension will be fitted) are replaced with standard side and roof glazing bars from the extension module kit. These
should be fitted using 15mm bolts. You only need two side diagonal braces per building, move the one (currently on main side) nearest the extension
join towards the rear.
Be careful not to mix up your extension cills and gutters. There will be a separate gutter and cill for the extension.
In addition one set of holes
in both the gutter, cill, and ridge sections are slightly closer together ( 586mm instead of 620mm ). When fitting the extension ridge, gutters and side
cills, the 586mm hole centres at one end of the extension components must abut the main greenhouse. Each of the extension joining plates should be
initially attached to the main building and then onto the 586mm spaced hole end of each extension section.
IMPORTANT: Each glazing bar centre should then be 620mm apart . If not your glass will not fit properly. See next pages 8 and 9 for more details.
Part
No.
Section Size
(mm)
6’
EX
8’
EX
5’ LEAN-TO RIGHT HAND SIDE
EXTENSION
D029R 1860 1
D024R 2480 1
D028R 1860 1
D017R 2480 1
D020 1860 1
D010 2480 1
D158 N/A 1
D114 N/A 2
D126 445 3 4
SYBOLM6X11
10mm 40
SYBOLM6X15
15mm 10
SYNUTM6 M6 72
SYBOLM6
X11CROP
10mm 12
MAIN
UNIT
REAR
MAIN
UNIT
REAR
Part
No.
Section Size
(mm)
6’
EX
8’ LEAN-TO RIGHT HAND EX.
D919R 1860 1
D916R 1860 1
D917 1860 1
D114 N/A 4
D126 445 3
D962 1890 1
D138 1167 2
D982 N/A 4
FS6006
FS6504
35mm
M6 S/S
4
4