Robinsons Extensions 6ft, Руководство по сборке

Страница: 3 / 16

3
EXTERNAL DIMENSIONS (mm)
Model sizes listed are nominal.
i.e.: an 8 x 10 is the model 8'6" x 10' 8"
MODEL A
(mm) WIDTH
B
(mm) LENGTH
C
(mm) DIAGONAL
5 x 4
REGATTA
1662
1392 2168
5 x 6 2012 2610
5 x 8 2632 3113
5 x 10 3252 3652
5 x 12 3872 4214
5 x 6 Lean to
5’ LEAN-TO
1619
2012 2583
5 x 8 Lean to 2632 3090
5 x 10 Lean to 3252 3633
5 x 12 Lean to 3872 4197
6 x 6
REGENT
1964
2012 2812
6 x 8 2632 3284
6 x 10 3252 3799
6 x 12 3872 4342
6 x 6 Lean to
6’ LEAN-TO
1929
2012 2787
6 x 8 Lean to 2632 3263
6 x 10 Lean to 3252 3781
6 x 12 Lean to 3872 4326
8 x 6
ROYALE
2584
2012 3275
8 x 8 2632 3688
8 x 10 3252 4154
8 x 12 3872 4655
8 x 6 Lean to 2012 3265
8 x 8 Lean to 2632 3680
8 x 10 Lean to 3252 4146
8 x 12 Lean to 3872 4648
10 x 8
ROSETTE
3208
2632 4150
10 x 10 3252 4568
10 x 12 3872 5028
12 x 8
REGAL
3824
2632 4642
12 x 10 3252 5020
12 x 12 3872 5442
14 x 8
RENOWN
4454
2632 5902
14 x 10 3252 5174
14 x 12 3872 5515
6ft ext. - 1860 -
8ft ext. - 2480 -
8’ LEAN-TO
2572
PLEASE CONTACT US FOR A BASE PLAN FOR ANY MODIFICATIONS
i.e. Drop door/s, dwarf wall, partition, etc…) NOT LISTED ON THIS PAGE.
MPORTANT: IF YOU HAVE ANYTHING OVERHANGING THE RIDGE ON
A LEAN-TO, PLEASE ALLOW HEIGHT CLEARANCE FOR THE ROOF VENT.
THE FOLLOWING DIMENSIONS ARE THE EXACT EXTERNAL BASE DIMENSIONS FOR THE ROBINSONS RANGE.
We cannot emphasis how important it is to have a proper base for your Robinsons Greenhouse to be erected upon.
It is essential that the BASE IS FLAT, LEVEL AND SQUARE AS WELL AS BEING SUBSTANTIAL enough to take the
weight of the greenhouse including its 4mm glass.
IMPORTANT : Do not anchor your greenhouse down until it is fully assembled including glazing unless you are 100% sure your base is
square and level. If not your glass will not fit properly.
THE BASE MUST BE FLAT, LEVEL AND SQUARE.
ROBINSONS
BASE PLANS
Note, when calculating the length of a unit that has an
extension you must add the main module dimension to
give you the overall length. See diagram below.
Note, for lean-to models less a gable end deduct 67mm
from the length.
length
width
EXAMPLE (mm)
External dimension of an 8' x 20' greenhouse.
8 ' x 12' main module 2584 x 3872
+ 8' extension
2480
Overall size
2584 x 6352
A brick perimeter base is equally suitable providing there
is a concrete foundation beneath it. We suggest using a
solid brick with no frogs or holes (quality stock bricks or
semi-engineering bricks). A brick plinth is an advantage
because it minimises the chances of any water running
back underneath the base cill.
Give yourself enough room around your base to allow for
fitting the glass and any on-going maintenance / clean-
ing. A slab base which is larger than the greenhouse is
the ideal solution.