Control Panel
Cleaning and maintenance
Particular care must be taken with the aluminium filters which must be periodically cleaned (at least every
two months). Remove the grease filters and wash them either by hand using hot soapy water or in the
dishwasher using mild detergent.
Note
- some discolouration of the frame may occur when washing in the dishwasher
Caution:
Never use abrasive or oil based liquid cleaners.
To clean the stainless steel and glass components of the appliance use mild detergent and warm water. In
areas of high humidity and coastal environments cleaning should be carried out frequently.
LED bulb replacement
1. Switch off the power to the canopy hood and allow the bulb to cool.
2. Remove the bulb by turning it by hand in an anti clockwise direction
3. Care must be taken to avoid the bulb falling onto the hob top
4. Replace the bulb by inserting it into the socket and hand turning in a clockwise direction
Optional accessories:
For other accessories, parts and service, please contact your local supplier (Refer to the Warranty
Certificate).
CHARCOAL FILTERS
2541
-60cm
2542
-90cm
1. Plug the Rangehood to power.
2. Push the low speed button and the motor runs at
low speed. Push the power button and the motor
will stop.
3. Push the mid speed button, and the motor runs at
mid speed. Push the power button and the motor
will stop
4. Push the high speed button and motor runs on
high speed. Push the power button and the motor
will stop
5. Push the light button; the LED lamps will come on.
Push it again and the lamps will turn off.
