5
Pre-Installation -
preparing the rangehood for installation
Ducted rangehood
If the rangehood is to be installed as a ducted hood, remove the appropriate duct knockout
A
.
Changing the handle
1.
Using a Screwdriver, unscrew the 3 screw on the back of the Handle.
2.
Select the desired handle option from those available, and reattach the new handle using the same screws
Recirculating Rangehood (for RO61SS/WH/80 only)
If the Rangehood is to be installed as a recirculating hood, first ensure the overhead cabinets are built according
to the diagram below, and
1.
Remove the Cover Tape
B
.
2.
If an 80mm handle is not installed. Remove the Front Fascia
C
by undoing the 3 screws on the fascia.
3.
Replace
C
with the Replacement Front Panel
D
constructed of the same or similar material as the cupboard
doors. See the diagram below for the height of panel.
NOTE; RO91SS/WH can be recirculated by fitting a custom made 80mm front fascia. 80mm fascia is not supplied
or available for RO91SS/WH
A
B
C
D
Cooking fumes
Filtered air
