4
Pre-Installation
-
continued
Ducting Options
The method of ducting should be carefully considered before installing the rangehood. The guide below
recommends the ducting components to use for all common ducting configurations - through the top of the home
(for the roof and soffit) and through the rear of the home. 285 x 85mm rectangular or 125mm round ducting
(using a rectangular to round adapter) can be used in conjunction with this model rangehood. Alternatively this
rangehood can be operated in recirculation mode (see page 4).
The highlighted area in the table below gives the recommended Uniduct item numbers for different
mounting and outlet options.
Duct mounting option
Rear
Top (roof)
Top (soffit/eave)
Uniduct item numbers
D
u
ct
o
u
tle
t o
p
tio
n
285mm x 85mm
Rectangular outlet
1575
1570 and 1571
1570 and 1596(x2)
and 1600
Ducting outlet adapted
to 125mm round
1637 and
1613
1637 and 1687
Extra lengths and/or bends may be required, depending on the length necessary and whether there are any
structural members in the way of the run e.g. rafters, beams etc
Please note that this chart is designed as a guide. Please consult Robinhood customer services if unsure.
For NZ phone 0800 760 667 or www.robinhood.co.nz. For AUS phone 1800 648 556 or www.robinhood.com.au.
