BOARD RETAINER
T-BAR
Opening Ironing
Operating Instructions
Step 1
Lamp
Replacement
1)
Disconnect Ironing
Centre from
power supply.
(Ensure the power
is switched off)
2)
Insert small screwdriver or slim knife as
shown, ease catch to side and slip out
diffuser.
3)
Replace lamp (40 watt max.)
4)
Slide diffuser back into aperture and “click”
into place.(Turn power back on)
To open Ironing Board,
lift retainer and pull
down as shown in
diagrams.
To store Ironing Board,
follow the steps in
reverse order.
Tilting angle of board
can be adjusted by
turning the T-Bar
clockwise or
anticlockwise.
To switch power on to
the socket, rotate the
knob in a clockwise
direction to the time
required for the
operation.
To switch off power to
the socket rotate the
timer in a anticlockwise
direction until the bell
sounds.
Stored
Fixing Of Magnetic Door Catch
F i g . 3
Robinhood Ironing Centre
- Electrical
• One piece full size board
• Auto timer and built in light
• Built in power outlet
• Magnetic door catch
• Heat resistant shelf for iron storage
• Utility shelf for spray bottle storage
• Right or left hand opening door
• Foam underlay and heat resistant cover
• 230/240 volt outlet and 40 watt light
• Surface or recess mountable
• Board level adjustable
Ironing Centre Features
The Ironing Centre’s 3 pin plug and lead can be easily plugged into the nearest
wall socket, or can be hard wired by an electrician.
Robinhood Ironing Centre
- Manual
• One piece full size board
• Foam underlay and heat resistant cover
• Magnetic door catch
• Utility shelf for spray bottle storage
• Right or left opening door
• Heat resistant shelf for ironing storage
• Surface or recess mountable
• Board level adjustable
Step 2
