gf17
17
Manual Robin SV ENG - v. 3.1.0
5 Configuration
5.1 Logging in to the Robin SV
The Robin SV can be used accessed as an ‘Administrator’ or as a ‘User’.
The Administrator can configure all settings of the Robin SV. To initially configure the Robin
you must login as an Administrator.
The User can only watch live video and optionally control the door opener. A User can’t
modify settings of the Robin SV.
The login credentials can be changed in the web interface of the Robin SV. The default credentials
are:
Administrator - Login: admin, Password: 123qwe
User - Login: user, Password: user
! Note: We strongly recommend to change the default password after the 1st login. !
We assume here that the network supports DHCP (‘Dynamic Host Configuration Protocol’); if so, all
settings such as the IP addresses, netmask, gateway and DNS are automatically populated.
DHCP is a default setting of the Robin SV, it will suffice in 99% of all networks. However, on
occasions the network may not support DHCP. If so, the network details must be set manually.
5
Configuration
