Select alarm to be armed. Press (A). Alarm symbol (((•))) will appear when the alarm is
armed or disappear when disarmed. Or alarm will be automatically armed upon entering
the setting procedure.
Using the Hourly Chime:
When armed, the hourly chime will sound a “beep” to
indicate the start of each hour.
Select chime function (AL). Press (A). Chime symbol (
) will appear when the chime
is armed or disappear when disarmed.
Notes:
• When armed, the alarm will sound for 20 seconds at the preset time.
• Silence the alarm sound by pressing any pushbutton.
• Alarm time(s) will be in same time system (12 or 24 hours) as NORMAL TIME.
• Alarm will be automatically armed upon entering the setting procedure.
MULTI-MEMORY CHRONOGRAPH OPERATION
From NORMAL TIME, press (C) twice to enter the CHRONOGRAPH mode. All zeros
should appear on the display as shown:
Chrono Mode Display
If all zeros do not appear
, to reset to all zeros:
1.
Running time: Press (B) to stop and press (A) to reset.
2.
Frozen time: Press (A) to rest.
3.
RECALL function (i.e. RECALL (RCL) symbol appears) press (C) and (D)
simultaneously. Display will show last reading taken. If running time, press (B)
to stop and (A) to reset. If frozen time, press (A) to reset.
You cannot enter or operate the chronograph unless the target chrono mode is
stopped and reset.
If TARGET CHRONO is running, press (B) to stop. Then press (A) to reset.
A chronograph is a digital display stopwatch. Your CHRONOGRAPH has 1/100 (one
hundredth (.01) second resolution, can recall up to 100 time readings from memory, at
any time, simultaneously displays lap and split times, and has a 16 hour timing range and
automatic lap counter. Use your CHRONOGRAPH to time single event, continuous
single events or take multiple readings:
