11
Dynamic Range Control (DRC) settings - DAB only
DRC can make quieter sounds easier to hear when your radio is used in
a noisy environment. This function is only for the DAB waveband.
1. Switch the unit on by rotating the
Function switch
to the Radio
position.
2. Slide
the
DAB/FM switch
to the 'DAB' position. 'DAB' will show on
the display.
3. Press and hold the
Menu button
until 'SELECT Manual' appears on
the display.
4. Press and release the
Tuning Up
or
Down buttons
until the display
shows 'SELECT DRC'.
5. Press and release the
Select button
to enter adjustment mode.
6. Press and release the
Tuning Up
or
Down buttons
to select required
DRC setting (default is 0) .
DRC 0 DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.
DRC 1 DRC is set as sent by broadcaster.
7. Press and release the
Select button
to confi rm the setting. The display
will return to radio mode.
Note:
Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC then the DRC setting in the radio will
have no effect.
1
2
5,7
3
4,6
4,6
