84
Display and Audio
Brightness control
The brightness of the display can be adjusted for when the radio is in standby and for
when it is in use. If you use the unit in the bedroom, you may prefer a lower standby
brightness level than the standard setting. There are four Standby brightness levels
and four levels for when the radio is in use.
To change the current brightness setting please follow these steps.
1. Press and hold the
Info
button to access the display brightness setting.
2. Rotate
the
Tuning/Select
control to choose either the High, Medium, Low or Off
brightness level. Press the control to set the level.
3. If the radio is playing, then the chosen brightness will be applied immediately.
If the radio is in standby, then the chosen brightness will be applied after a 10
second delay.
4. Alternatively you can set the display brightness using the menu system. Access
the menu for the current mode by pressing the
Menu
button.
5. Rotate the
Tuning/Select
control until
'System settings'
is highlighted on the
display. Press the control to enter the System Settings menu. Rotate the
Tuning/
Select
control until
'Brightness'
is highlighted on the display. Press the control.
6. To adjust the display brightness when the radio is switched on rotate the
Tuning/
Select
control until
'Normal'
is highlighted on the display. To adjust the display
brightness when the radio is in standby rotate the
Tuning/Select
control until
'Standby'
is highlighted.
Press the control to enter the selected brightness adjustment mode. The current
setting will be marked with an asterisk.
7. Rotate
the
Tuning/Select
control to choose either the High, Medium, Low or Off
brightness level. Press the control to set the level. Press the
Menu
button to exit.
When the radio is in Standby mode, pressing a button or turning a rotary control will
cause the radio to switch to the normal brightness level for a few seconds. This is so
that even if the standby brightness level is set low, it is still possible to see the time
when needed.
Note that the Off settings are not completely off, but are very low. The settings in
Standby mode are lower than their equivalents when the radio is in use.
Normal
Standby
Brightness
Brightness
High
Medium
Low
Off
*
DAB
FM
Aux In
Sleep
Alarms
System settings
Main menu
Equaliser
Network
Time/Date
Brightness
Language
Factory Reset
System settings
Brightness
High
Medium
Low
Off
*
1
4,7
2-7
Содержание Stream217
Страница 102: ...99 Notes ...