17
Open
WEP
WPA/WPA2
Authentication
Encryption type
PSK AES / TKIP
Key:
0 1 2 3 4 5 6
7 8 9 . _ - @
, a b c d e
f g h i j k l
m n o p q r s
01234ABCDE
Network settings
Please wait
Connecting...
Manual network con
fi
guration - cont.
The three controls on the right-hand side of the screen have special functions. You can quickly access
these by pressing the
Info
button and then use the
Tuning/Select
control as needed:
select
'
' to erase a character just entered (long press to clear);
Info
again to continue
select
'
' when the complete encryption key has been entered
select
'
' to cancel and go back to the SSID settings screen
Once the key is entered the radio should connect to your network. Please skip to step 11.
9. WPA and WPA2 are more secure than WEP, although of these two WPA2 offers a higher level of
security. Having selected WPA/WPA2 in step 7, you then have to specify the variant used. They are
AES (Advanced Encryption Standard) and TKIP (Temporal Key Integrity Protocol). Simply select the
'PSK AES/TKIP' menu option using the
Tuning/Select
control.
10. The radio will then require you to enter the encryption key. This must be a string of between 8 and
63 characters and must be identical to the key which has been entered into your router.
Note - the
encryption key is sensitive to the use of upper and lower case letters and symbols. Take care to enter
the key exactly, or the radio will not be able to connect to your router.
The three controls on the right-hand side of the screen have special functions. You can quickly access
these by pressing the
Info
button and then use the
Tuning/Select
control as needed:
select
'
' to erase a character just entered (long press to clear);
Info
again to continue
select
'
' when the complete encryption key has been entered
select
'
' to cancel and go back to the AES / TKIP options screen
Once the key is entered the radio should connect to the network.
11. While the radio is trying to connect to the network, it will display
'Connecting...'
. If the connection is
made successfully, the radio will return to the Network Settings menu. If the unit cannot connect, then
it will display a
'Failed to connect'
message and will return to the SSID entry screen (step 6).
Once connected, the network settings are stored in the radio. The settings are retained when the radio
is disconnected from the mains.
You may now use the
Back
and
Mode
buttons to access the functions of your internet radio.
Network wizard
PBC Wlan setup
View settings
Wlan region
Manual settings
NetRemote PIN Setup
Network settings
Содержание Stream217
Страница 102: ...99 Notes ...
