Roberts Stream 93i, Руководство пользователя

Страница: 4 / 104

Before you can use this product
Before you can use your sound system, you must have the following:
● A broadband Internet connection (not required for DAB, FM or Music Player functions).
● A wireless access point (WiFi) or a wired Ethernet connection connected to your broadband
Internet Service Provider, preferably via a router. In many cases the broadband modem,
router and wireless access point will be a single combined unit supplied by your Internet
Service Provider or bought from a computer store.
● If your wireless network requires a security password to allow connection, then you either
need to know the WEP, WPA or WPA2 key used for encryption so that you can get the sound
system to communicate with the network, or your router needs to offer WiFi Protected Setup
(WPS).
● If you choose to connect the radio to your network using a wired Ethernet connection, than
an Ethernet cable of appropriate length will be needed. If it is intended to listen to FM radio
extensively, then there may be bene
fi t in using a shielded Ethernet cable since this may
reduce possible interference to the radio.
The radio's WiFi system is compatible with 802.11b, g, or n networks.
If connecting using WiFi, the sound system will typically work within a 10-20 metre radius from
your wireless access point. The actual range achieved will depend upon the building type, other
nearby wireless networks, and possible interference sources. DAB and FM radio functions can
operate wherever the sound system is able to receive a suitable broadcast signal.
IMPORTANT: Before you continue, make sure that your wireless access point or router is
powered up and working with your broadband Internet service (use your computer to verify this).
To get this part of the system working you must read the instructions supplied with the wireless
access point or router.
1