Roberts Stream 93i, Руководство пользователя

Страница: 15 / 104

12
Con fi guration
Connecting to your computer network - cont.
There are two indicator lights incorporated into the RJ-45 connector.
If you have problems with your wired connection, they may help you
to identify the possible cause of the problem.
Green ON = Link established; OFF = no connection
Green Flashing = Data transfer
Yellow ON = 100 Mbits/sec link; OFF = 10 Mbits/sec link
If your network does not support automatic con fi guration or if you wish
to set it up manually then you should select '[Manual con fi g]' instead
of selecting '[Wired]' in the Network Wizard, then go to page 16.
3. If you plan to use a WiFi connection, you will fi rst need to identify your
network in the list of network names presented by the Network Wizard.
If no networks are found then you may have to get your wireless router
working (please see the instructions supplied with it) or you may be
too far from the router.
When the sound system fi nds your wireless network, it displays the
Network Name (SSID) for the wireless access point on the screen.
This is a name that is allocated to the access point in your router by
the person who set up the network - for example:
'Jones family' or
'Paul's network' . If the router supports WiFi Protected Setup, then
'[WPS]' will be shown in front of the SSID.
It is possible, and in some locations highly likely, that your sound
system will
fi nd more than one wireless network, in which case you
should choose which one you need to connect to.
4. Rotate the Tuning/Select control to see the SSID for each wireless
network that has been found. If your network is shown proceed to step
6 on the next page. If it is
not shown then proceed to step 5, also on
the next page.
If you make a mistake at any point, use the Back button to go back
to the previous screen.
Jones family
[WPS] Paul’s network
Smith
[Rescan]
[Wired]
[Manual config]
SSID
Internet radio
Music player
DAB
FM
AUX in
Sleep
Main menu
3-4
Setup wizard
Setup wizard
completed
Press ‘SELECT’ to exit
Network settings
Network wizard
Scanning...