T u n in g
Setting the clock automatically
The clock time and day of week can be set automatically when receiving
an RDS station that transmits clock time (CT). The CT information is
transmitted once every minute. If the station has sufficient signal strength
the clock will set within one or two minutes.
1.
Switch on the radio with the
Power button
.
2.
Select the FM waveband using the
Waveband switch
.
3.
Fully extend the
Telescopic aerial
.
5.
Repeatedly press the
Time button
until the auto time symbol
appears in the display.
6.
Press and hold down the
or - buttons
until the frequency in
the display begins to change rapidly, release the button.
7.
The radio will now start to search the FM waveband and will stop when
it finds a station of sufficient strength. If the station is of sufficient
strength the
symbol will light up in the liquid crystal display.
8.
The auto time indicator
will flash in the liquid crystal display
indicating that the radio is waiting for the RDS time signal. The
indicator will stop flashing when the time is set.
If the clock does not set within three to four minutes, the radio station
may not be transmitting clock time (CT) information - try another radio
station.
The clock time and day of week are updated each time the radio is
switched on and whilst listening to an RDS station transmitting clock
time (CT) information.
D is p la y
F M
M W
L W
T im e
7
R9906 Instruction Book.pm6
24/10/99, 14:22
8
