29
Active alarms are indicated in the display by the
symbol and the
corresponding alarm number.
Important:
If using your iPod or iPhone as the source for the alarm, then
be sure to dock your iPod or iPhone. If the iPod or iPhone is not detected
a buzzer alarm will sound instead.
When the alarm sounds
The alarm will sound at the selected times for up to 60 minutes unless
cancelled. The volume used for the alarm will be speci
fi
ed during the
alarm setting procedure. If the radio cannot connect to the speci
fi
ed radio
station, the buzzer will be used instead.
Note:
If the radio is switched on because of a radio alarm you can control
basic functions such as the volume control.
When the buzzer alarm activates it will start softly and gradually increase
in level.
The alarm icon will
fl
ash on the screen and the radio will automatically
switch back to standby mode when the 60 minutes have elapsed.
To cancel the alarm press the
On / Off
control or one of the alarm buttons.
You may have to press the
On / Off
control more than once depending
on the position of the control.
If the alarm sounds when the
On / Off
control is in the down position then
the
fi
rst press (down to up) will cancel the alarm but will leave the radio
playing. A second press (up to down) will put the radio into standby.
Alternatively, you may use the
On / Off
button on the remote control.
