23
Scan sensitivity setting - FM
Your radio will normally scan for FM broadcasts which are strong enough
to give good reception. However, you may wish the Auto-scan function
to also be able to
fi
nd weaker signals, possibly from more distant radio
transmitters. Your radio includes a local / distant option for the Auto-scan
function.
1. Press
the
On / Off
control to switch on your clock radio.
2. If needed, press and release the
Mode
button until the FM mode is
selected.
3. Press and release the
Menu
button.
4. Press
the
Tuning Up
or
Down
buttons until the display shows
'Scan
Zone'.
Press and release the
Select
button to enter the scan zone
selection menu. The current setting will be marked with an asterisk.
5. Press
the
Tuning Up
or
Down
buttons to switch between Local and
Distant options on the lower line of the display. The Distant option will
allow the radio to
fi
nd weaker signals when scanning.
6. Press and release the
Select
button to con
fi
rm your selection. The
radio will then revert to the normal information display. The Local or
Distant setting is stored in the radio and remains in force until changed
or until a System Reset.
Note:
The initial setting (out of the box, or after a System Reset) causes
the radio to ignore weaker (or more distant) signals.
1
3
4,5
4,5
4,6
2
*
