Roberts Gorden CORAYVAC CRVB04PN, Инструкция по эксплуатации

Страница: 10 / 30

CRV-S
ERIES
F
UEL
C
ONVERSION
I
NSTRUCTIONS
6 of 21
Step 5.2 Burner Removal
1. Turn off gas supply valve, disconnect gas from
burners.
2. Turn off power supply and disconnect wires from
burners and pump.
3. Unplug thermostat wires from burner.
4. If outside air is installed, disconnect.
5. Remove the bolts which hold the burner on the
transition tube using a 1/2" wrench.
6. Remove the burner. See Figure 3 .
7. Save the gasket (P/N 02568200) or re-install a
new one after conversion.
Step 5.3 Door Assembly Removal
Remove the wing screws for each door and set the
control side doors aside.
See Page 7, Figure 4 .
FIGURE 3: Burner Assembly Overview