Robern VESPER EDGELINE LIGHTS Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 36

Robern VESPER EDGELINE LIGHTS Скачать руководство пользователя страница 17

Part no. 209-1330 01/06/21

Vesper Edgeline Lights

17

© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.

800.877.2376

www.robern.com

PRODUCT ALIGNMENT

3. Adjust the cabinet doors until they align with the lights using the three-way adjustment features in the hinges, adjusted using a #2

Phillips Head screwdriver.

3A. Height: With the hinge slightly closed, you can access the middle screw. This screw will move your door front up and down.

3B. Side to Side/Depth: With the hinge fully extended, you can access the front and back screws. The front screw will adjust the door

from side to side and the rear screw will adjust the door's depth.

4. Press a # 10 screw cap [SS672], provided with each light, onto all exposed screw heads.

5. Press a hole plug [SS134], included with your cabinet hardware, into all open mounting holes.

FINAL ASSEMBLY - CAPS AND PLUGS

PRESS A #10 SCREW CAP [SS672], PROVIDED WITH EACH LIGHT, ONTO ALL EXPOSED SCREW HEADS.

1.

PRESS A HOLE PLUG [SS134], INCLUDED WITH YOUR CABINET HARDWARE, INTO ALL OPEN MOUNTING HOLES.

2.

FINAL ASSEMBLY - CAPS AND PLUGS

PRESS A #10 SCREW CAP [SS672], PROVIDED WITH EACH LIGHT, ONTO ALL EXPOSED SCREW HEADS.

1.

PRESS A HOLE PLUG [SS134], INCLUDED WITH YOUR CABINET HARDWARE, INTO ALL OPEN MOUNTING HOLES.

2.

FINAL ASSEMBLY - CAPS AND PLUGS

PRESS A #10 SCREW CAP [SS672], PROVIDED WITH EACH LIGHT, ONTO ALL EXPOSED SCREW HEADS.

1.

PRESS A HOLE PLUG [SS134], INCLUDED WITH YOUR CABINET HARDWARE, INTO ALL OPEN MOUNTING HOLES.

2.

FINAL ASSEMBLY - CAPS AND PLUGS

PRESS A #10 SCREW CAP [SS672], PROVIDED WITH EACH LIGHT, ONTO ALL EXPOSED SCREW HEADS.

1.

PRESS A HOLE PLUG [SS134], INCLUDED WITH YOUR CABINET HARDWARE, INTO ALL OPEN MOUNTING HOLES.

2.

Surface Mount

Recess Mount

SS672

SS134

SS134

SS672

SS672

SS672

3A

3B

«
...
15
16
17
18
19
...
»

Содержание VESPER EDGELINE LIGHTS





































Отзывы:

Нет отзывов