Robe Stage Faze 1500AT Скачать руководство пользователя страница 3

2

3

1.Introduction

Thank you for choosing an ROBE StageFaze 1500 AT.  You now own a rugged and powerful state-of-the-art machine.  Prior to use, 
we suggest that you carefully read all of the instructions.  By following the suggestions found in this user manual, you can look forward 
to the reliable and satisfactory performance of your ROBE Stage Faze 1500 AT machine for years to come.

Please follow these operation, safety and maintenance instructions to ensure a long and safe life for your fog machine.

2.Cautions

Risk of electric shock.  Disconnect the appliance from the electric supply before 

removing the cover. 

 
Note: there are no user serviceable parts inside.

 

Danger of Electric Shock

 

Keep this device dry.

 

For inside use only. Not designed for outside use. 

 

 

Prior to use take care to determine that the unit is installed at the rated voltage.

 

Always unplug your ROBE Faze machine before filling its tank.

 

Keep fog machine upright.

 

Unplug the machine when not in use.

 

This machine is not water - or splash-proof.  If moisture, water, or fog liquid gets inside the housing, immediately unplug  

 

the unit and contact a service technician or your ROBE distributor before using it again.

 

No user serviceable parts inside.  Refer to your ROBE distributor or other qualified service personnel.

 

Danger of Burns

 

For adult use only. Never leave the unit running unattended.  

 

Never aim at persons directly and keep a minimum distance of 3 m to the nozzle.

 

Faze machine output area is very hot.

  Avoid coming within 60 cm of the output nozzle during operation.

 

Keep a minimum distance of 60 cm to all flammable, combustible objects and objects sensitive to heat.

 

Locate the Faze machine in a well-ventilated area.  Never cover the unit's vents.  

 

Never aim the output nozzle at open flames.

 

If the supply cord is damaged, it must be replaced by manufacturer or its service agent or similarly qualified personnel in  

 

order to avoid a hazard.

 

Always allow your StageFaze 1500 AT to cool down before attempting to clean or service it.

  

Danger of Explosion

 

Never add flammable liquids of any kind (oil, gas, perfume) to the Faze liquid.

 

Use only original liquid recommended by ROBE distributor.

 

Spilled fluid or splashed fluid droplets can cause slip hazard.

 

Always make sure there is sufficient liquid in the Faze liquid tank. Operating this unit without liquid will cause damage

 

 to the pump as well as over-heating of the heater.

 

If your ROBE Faze machine fails to work properly, discontinue use immediately. Drain all fog liquid from the tank, pack the 

unit securely (preferably in the original packing material), and return it to your ROBE distributor for service.
Always drain tank before mailing or transporting this unit.
Never drink fog liquid.  If it is ingested, call a doctor immediately. If fog liquid comes in contact with skin or eyes, rinse thoroughly with 
water.

Pay attention to all warning labels and instructions printed on the exterior of 

 StageFaze 1500 AT

 

People with health problems or problems of therespiratory tract or with an inclinati-

on for allergies should avoid any contact with artificially-made fog.

Содержание Stage Faze 1500AT










Отзывы: