Robe ROBIN ParFect 100 SmartWhite, Руководство пользователя

Страница: 21 / 28

21
(Prog 1-Prog 3), each up to 40 steps. The item "All" icludes programs 4-6 in a chain.
Music T - Music trigger . Select this function to enable the sound control of the running program via the built-in
microphone (the option Audio in the Personality menu has to be set on).
Auto Run - Presetting playback . This function allows you to select the program which will be played in the
stand-alone mode after switching the fixture on. Selected program will be played continuously in a loop.
Off - The option disables „Auto Run” function.
Prog 1- All - Selected program will start running after switching the fixture on.
Pr Play - Playing program . Select this menu to run a desired program in a loop.
Prog 1- All - Select the program you wish and press [ENTER]. The selected program
starts running. By Pressing the [ENTER] again, the program pauses running. The speed
of the running program can be changed by means of the [NEXT] and [PREV] buttons
(100%-default value).
Note: adjusted program speed is saved into the fixture and will not be changed until another
program speed adjusting is performed or default values are loaded.
Pr Edit - Editing program . Select this menu to edit or create the program. The ParFect 100 has three user-
-editable programs, each up to 40 steps. Each program step has a step time - during which effects last in the
current step and a fade time- during which effects move to new positions.
To edit program:
1. Press [NEXT] or [PREV] to select the menu "Pr Edit" and press [ENTER].
2. Press [NEXT] or [PREV] to select the desired program and press [ENTER] button.
3. Press [NEXT] or [PREV] to select the desired program step and press [ENTER] button.
4. Press [NEXT] or [PREV] to select the desired item and press [ENTER] button. Now you can edit by [NEXT]
or [PREV] buttons the DMX value (0-255) for selected item:
Prg En. a total number of the program steps (value 1-40). This value you should be set before
starting of programming (e.g. if you want to create program with the 10 steps,
set Prg En=10).
Powr a power/special function s channel
Stro a strobe/shutter
Dimm a dimmer coarse
F.Tim a fade time (0-25.5 sec)
S.TiM a step time (0-25.5 sec)
COPY copying the current prog. step to
the next prog. step
5. Press [ENTER] button to confirm adjusted value .
6. Press [ESCAPE] button, select next prog. step, press [ENTER] button and repeat steps 4 - 6).
6.7 Special functions (Special)
RDM Low - This menu item shows the first part of the RDM identification code .
RDM High - This menu item shows the second part of the RDM identification code.
Wireless - Wireless DMX information . The menu allows to read some information about
Wireless DMX operation
Stat - Wireless status . Use the menu to read wireless DMX status.
Unlink - use this item to unlink fixture from wireless DMX.
Sw Upd - Software update . The menu item allows you to update software in the fixture via either serial or
USB port of PC.
The following are required in order to update software:
- PC running Windows 95/98/2000/XP/7 or Linux
- Update software