Robe ROBIN MegaPointe Скачать руководство пользователя страница 7

Страница: 7 / 59

3.2 Changing the lamp

DANGER !

Install the lamp with the fixture unplug from mains !

To change the lamp

1. Disconnect the fixture from mains and allow it to cool at least 20 minutes.

2. Loosen the two quarter-turn fasteners (1) on a lamp cover and remove the lamp cover (2) to get into lamp

compartment.

3. Remove both fastons (3) from flat terminals of the lamp.

4. Holding the lamp by its ceramic base (4), carefully turn the lamp counter-clockwise by a quarter turn to release

the lamp from a lamp holder.

5 Holding the new lamp by its ceramics base (4), carefully insert the lamp into the lamp holder and turn it clockwise

by a quarter turn until you it reach a stop. Do not touch the lamp with bare hands. If necessary,

lamp can be cleaned with lint free towel before operation

Do not install a lamp with a higher wattage! A lamp like this generates temperatures the device is

not de signed for. Please follow the lamp manufacturer‘s notes!

6. Slide both fastons (3) on the lamp terminals and check that fastons are fastened properly.

. Re-insert the lamp cover (2) and tighten the two quarter-turn fasteners (1) .

8. Connect the fixture to the mains.

9. Reset the "Lamp On Time” and "Lamp Strikes” counters in the menu "Information”.

This lamp emits ultra violet (UV) radiation and operates at high pressure!

Do not operate this fixture without properly fastened the lamp cover !

Unlock and remove the lamp

Lamp in locked position

Turn the lamp left

Lamp in unlocked position

Содержание ROBIN MegaPointe




























































Результаты поиска

Содержание ROBIN MegaPointe

Отзывы:

Похожие инструкции для ROBIN MegaPointe

Бренды по названию

Популярные бренды

Robe ROBIN MegaPointe, Руководство пользователя

Результаты поиска

Содержание ROBIN MegaPointe

Отзывы:

Похожие инструкции для ROBIN MegaPointe

Бренды по названию

Популярные бренды