Robe ROBIN MegaPointe, Руководство пользователя

Страница: 29 / 59

29
6.6 Tab "Service"
Adjust DMX Values - The menu allows you to set all effects to desired positions before fine calibration of the
effects .
Calibrations - This menu enables fine calibration of fixture effects and download default calibration values.
Calibrate Effects - The menu allows the fine adjustment of effects. The menu contains list of effects
which can be calibrated:
Pan - a fine pan movement
Tilt
- a fine tilt movement
Cyan
- a cyan wheel
Magenta - a magenta wheel
Yellow - a yellow wheel
Colour Wheel - a colour wheel
Effect Wheel - an effect wheel
Static Gobo - a static gobo wheel
Rot. Gobo Wheel - a carousel of rotating gobos
R. Gobo Index 1 - a fine movement of rotating gobo 1
R. Gobo Index 2 - a fine movement of rotating gobo 2
R. Gobo Index 3 - a fine movement of rotating gobo 3
R. Gobo Index 4 - a fine movement of rotating gobo 4
R. Gobo Index 5 - a fine movement of rotating gobo 5
R. Gobo Index 6 - a fine movement of rotating gobo 6
R. Gobo Index 7 - a fine movement of rotating gobo 7
R. Gobo Index 8
- a fine movement of rotating gobo 8
R. Gobo Index 9
- a fine movement of rotating gobo 9
Prism W 1 - a prism carousel 1
Pri W. 1 R.1 - a fine movement of rotating prism 1 on prism carousel 1
Pri W. 1 R.2 - a fine movement of rotating prism 2 on prism carousel 1
Pri W. 1 R.3 - a fine movement of rotating prism 3 on prism carousel 1
Prism W 1 - a prism carousel 2
Pri W. 2 R.1 - a fine movement of rotating prism 1 on prism carousel 2
Pri W. 2 R.2 - a fine movement of rotating prism 2 on prism carousel 2
Pri W. 2 R.3 - a fine movement of rotating prism 3 on prism carousel 2
Frost 1/1 - a light frost position 1
Frost 1/2 - a light frost position 2
Frost 2/1 - a medium frost position 1
Frost 2/2 - a medium frost position 2
Zoom - a zoom module position
Focus 1
- a focus module position for rot gobo
Focus 2
- a focus module position for static gobo
Strobe 1/1 - a strobe lamella 1 position 1
Strobe 1/2 - a strobe lamella 1 position 2
Strobe 2/1 - a strobe lamella 2 position 1
Strobe 2/2 - a strobe lamella 2 position 2
Light Green F - a minus half green filter position
Frost Filter - an auxiliary optic element position
HotSpot 1 - a hotspot position 1
HotSpot 2 - a hotspot position 2
By using these items you can calibrate and adjust effects to their right positions.
Calibration via the control board
1. Disconnect DMX controller from the fixture and enter the "Calibrate Effects" menu.
2. Use the [up arrow] and [down arrow] to find desired effect and touch it to enter the fine effect adjustment
screen.
3. Set desired value and save it by touching the [confirm].
4. Repeat steps 2 and 3 for the next effects.
5. After calibrating all effects, touch the [confirm] to save all adjusted values and reset the fixture.
Calibration via the DMX controller
1. Connect DMX controller to the fixture and set fixture effects to the desired positions before fine calibration.
2. Enter the "Calibrate Effects" menu and now you can calibrate desired effects by a DMX controller.